Tim King Hydra Jett Allert !!!!!
Hydrajett toy swivel
Only 3/4" swivel flow >>>>
links below
hydra jett tim king rip off report
James been ripped off on ebay tim king
4# Hydrajett buyers who got scamed
Hydrajett swivel leaks on 1st hole
hydrajett rig breaks down, no help
Missionary beat by hydrajett tim king
4793.00 judgement on hydrajett hydrafab tim king
Tim king promised complete tech support after purchase LIES!
hydrajett tim king cheated me out of 9200 dollars.
Above pic hydra jett swivel shows restricted water flow ID and also crack swivel bearing after on 4 hrs of use .
Below picture shows skidsteer mount hydrajett toy swivel problems. After buyer buys hydrajett, then they find out upgrades and repairs that are needed just to drill with it. Also notice side swivel inlet hose is only 1 1/4", and swivel quill is even smaller.What good is 2 inch or 3 inch pump and reduce to 1 1/4" side inlet hose, and swivel end is only 3/4" inch.
Hydrajett, hydrafab swivel is FAMOUS for LEAKS, gives you a shower while your drilling, and drilling mud covers everything and corrsion on everything prematurely , and also easy loose drill pipe with you have near Zero flow.
( Below ) hydra crap TOY swivel leaking under 50 psi water pressure, but tim king claims 1100 psi rated swivels. What a joke.
( below) Home made Hydrajett small flow bit next to real water well drill bit. see for yourself. Drilling with Hydrajett toy pipe and bits is like drilling with a coffee straw for flow. No flow means no depth. Also notice blue bit is only 4 inch, but has that much flow. the hydrajett bit is 8 inch with TINY flow. No way it will work properly . Hydrajett boremaster equipment is designed to cash checks, not drill with. Cheap and toy is not good for drilling equipment.
Hydrajett tim kings replys, ITS NEVER ever HIS FAULT.
Fake Hydra Jett tim king Tool joint pipe. As you can see in pictures, just cheap china plumbing pipe threaded with flat electric conduit threads, with small larger pipe sleeve welded on to look like machined tool joint pipe.The reason for fake tool joint pipe is to make a rig to sell and apear to be better than it really is. Real tool joint drill pipe cost more than hydrajett boremaster sells rigs for. (pic below)
Also notice Off lenght drill pipe measurements, than make logging a water well impossible. Most drill pipe is 5ft, 7ft, 10ft, 15ft 20ft, but 54 inches and 3/8" how could anyone possibly log a water well, with such crazy lenghts. This is proof, someone with ZERO drilling experience was involved in designing these junky hydrajett toy rigs.
Hydra jett tim king Swivel failed, when it hit hard dirt, the soft china steel shaft twisted off like butter. As you can see in pic,
Below hydrajett boremaster swivel shaft shows the Poooor TINY WATER flow with tiny hole for water to flow through. Even if you have 3 inch mud pump, when you have hydrajett TOY swivel with 3/4" inch through hole, thats what your drilling with. Toy rigs get toy results.
Only has 3 SHALLOW measly thread hold pipe from falling in bore hole. Also you can see in picture, Swivel connection is NOT heat treated for long and many years of use, just SOFT economy steel.
Paint on mast is like new. this happed on rig on 1st well at 45ft. Main swivel sahft twisted off.Also notice swivel shows signs of leaking, with drill mud on out side of housing.
Once buyer drilled one shallow well with hydrajett hydra fab, boremaster rig, swivel came apart like a $2 suit case.
USED RIGS
IDECO CABLE TOOL RIG --- 5800.00 NEED SOME WORK, NO TOOLS.
MAYHEW 1500 --- RIG ONLY, NO TRUCK, BUT CAN MOUNT- 35k
Failing 1000 - complete rig with small mud pump, no truck-- 19k
Gardner denver 1000 complete rig with on board air and mud pump and 400ft of drill pipe ----- 32,500.00 - no truck, but we can mount on your truck.
Used skidsteer Drill 500ft rated --- includes 300ft of drill pipe. --15,320.00 only 150 hrs
2000ft rated Portadrill on older IH truck, complete with tooling and 1200ft of drill pipe.
needs refurbished, sold as is 85k
Bucyrus 20 W - needs work, but complete and some tooling - 12,000.00
RIG SERVICE
We do rebuild large truck rigs, replace and rebuild trucks, and we also do remounts . Replacing older trucks with newer diesel rebuilt trucks with low hours.
Also we rebuild and custom manufacture diesel mud pumps, piston and centrifical pumps, duplex and triplex pumps.
Diesel compressors 350 cfm , 600cfm, 750 cfm, 1300 cfm and larger.
Used and refurbished.
Older diesel compressors prices start at 9500.00 and depending on how large CFM go to 38k.
We also do compressor rebuilding, refurbishing, and custom fab set up.
Used Cable tool rigs available.
20 w and speedstar units.
Please email us direct at Drillcat@gmail.com
Copyright 2015 Drillcat Rigs -parts- equipment. All rights reserved.