Drillcat Rigs -parts- equipment

  • more stuffClick to open the more stuff menu
    • Illegal Rain water harvesting
    • Well Developement-Blowing the Well
    • Getting sand out of your Water
    • Permit a water well or not ?
    • Outlaw Wells
    • Government Control of your wells
    • How to ruin a water well
    • City water or common Well water
    • Sky high water bills
    • Where to build a pond and keeping it clean
    • Get Well Drilling license
    • Drilling Definitions
  • Parts
  • hydrafab boremaster scam
  • Drilling RigsClick to open the Drilling Rigs menu
    • drilling rock
  • locate equipment
  • rig-rentalClick to open the rig-rental menu
    • finding a drilling contractor
    • Questions & Answers

Drilling  Rigs --- email us at drillcat@gmail.com

 

Tim King Hydra Jett Allert !!!!!

links below

 

 

hydra jett tim king rip off report

James been ripped off on ebay tim king

4# Hydrajett buyers who got scamed

Hydrajett swivel leaks on 1st hole

hydrajett rig breaks down, no help

 Sell your Rig HERE. email us what you have!

 

Gardner Denver 1000 Rig only 38,000.00

complete with mud pump, air, drill pipe ect.

 

 Hydra drill HD55 --- 3600.00 complete, with pipe and bits, no pump. low hours.

buck rodgers trailer rig --- 21,500.00

work ready includes 200ft of mayhew Jr drill pipe.

Lonestar LS 200 ---  13,500.00  New upgraded swivel,  and upgraded 10ft drill pipe, 2 3/8" mayhew Jr. bits, and pump.

Lonestar LS 200/ LS300 swivel upgrade. Larger flow, higher pressure and not a through away like the stock lone star swivels, hese are ( Rebuildable) price -715.00 ea

Ardco drill buggy ----  35,300.00 New swivel, new engine, new drill pipe.

Simco 2400 ----- 14,700.00  On skid can be mounted on truck or trailer, GAs wisconsin 4 cy engine. No augers.

Simco 2400SK1 ---  22,450.00   Skid mounted, with diesel engine.

Low hours ( 350) work ready.

Simco 2800  ------ 36,500.00   mounted on C70 chevy truck.

includes 300ft of drill pipe.

Shop Built deep drilling rig 800ft rated --- 28,500.00

includes 800ft of drill pipe, mud pump, all mounted on gooseneck trailer.

 Mayhew 1000 with piston mud pump and 600cfm air. Rig is nice, truck is rough.  Price 21,000.00

Bucyrus erie 22R mounted on F9000 truck --- 37,000.00

1100ft rated includes drill pipe, mud pump and some bits.

 

danco purcussion rig ---  28,000.00  includes bailer, bits and tooling,

Large Auger drive ----  13,250.00  truck mounted will auger holes to 24 inch and 60ft deep.

 

For pictures, more specs and info, please email us at drillcat@gmail.com  

 

email us your rig info, we can post your used rig here.

 

 

 

 

 

 

 


Cable tool drilling rigs

-------------------------------------------------------------------------------------------------------------------

Speedstar 71 6500.00 1000ft rated. ( Email for more info)

one Speedstar 71 cable tool drilling rig. The speedstar 71 is a 1000ft rated drilling rig. Where can you get a drilling rig rated for 1000ft that will drill hard rock for this price. Do your homework, speedstar 71 is first class set up.

*The Good:

Its speedstar 71, is same class is Bucyrus 22w, but better. Includes lots of tooling and bits, and wrenches. Comes with 6" bit and 6" inch bailer. also includes other bit sizes. The harder the formation the better the cable tool works.

Cable tool rig will let you know when you hit water, unlike rotary mud rigs. When bailer comes up with water in it, you know you hit water.

Cable tool rigs do not need ! 250.00 polymer, no gas guzzling water truck needed, no air compressor needed, no need to set costly casing until you see you hit water. No 200.00 per joint drill pipe needed. This rig would be great for farmer, rancher or anyone needing a water well, and does not want to spend 20,000 for dry hole from drilling contractor.

Cable tool also can let you set casing as you drill if you want. and cable tool rig also is capably of being used as a pulling unit to service new or old water wells and setting pumps or cleaning out old water wells.

Speedstar 71 is sold as is, and will need TLC. Before you can drill with this Rig.. You will need, new paint job, some new cable, new battery and gas tank cleaned. gears and bearings seem to be in good shape, and mast is good too. No new rig, but not 40k either. Where else can you get a 1000ft rated hard rock rig for this price.

*The BAD:

Rig is good, Truck is not very good, you can mount rig on trailer or on another truck. Even though rig is complete and includes bits and tooling, it will need some work, like cables replaced, International 4 cy engine will need tune up and fuel tank cleaned, and some belts may need replaced. A speedstar 71 in great condition that needs no work sells for 50k and up. You are basically buying rig and truck is free. If you have basic mechanic skills this would work for you.

-------------------------------------------------------------------------------------------------------------------

Diesel powered Air compressors
----------------------------------------------------------------------------------------------------------------

600 cfm - used low hours on wheels. price -- $12,500.00

750 cfm used detroit diesel. Price --- $9100.00

900 cfm used diesel powered, cummins. price -- $14,500.00

1250 cfm, used low hours. detroit diesel. price: $15,180.00

1600 cfm diesel powered. price -- $37,400.00

 

            High production Rig - fast drilling unit 

Gardner Denver 1500  - 6x8 GD mud pump - 750/350 GD air compressor

  $125,000.00 US dollars   - shipping available

water well drilling rig

 

 WORK READY

Gardner Denver 1500 Water Well Drilling Rig

 

This unit will drill DEEP, hard rock, and fast. A new rig like this with these options would be over 1 million dollars.

We have a complete ready to go to work Gardner Denver 1500 rig mounted on crane carrier heavy duty truck.
Truck has the famous Cummins 400 with 13 spd road ranger.
Runs perfect, rebuilt less than 2 years ago.
Rig is in great shape and comes complete with Drill collars, drill pipe ( 680ft) of the heavy wall drill stem ,drill bits, roller bits, PDC bits, rock bits, subs, and pile of extra tooling and parts.
Mud pump is Gardner Denver 5 1/2 x 8 with new gear end, and new pump end.
On board air compressor high PSI Gardner Denver 3 stage 750/350.

planetary hydraulic pulldown system

Turn table is retractable 10" inch.
Rig is set up for 20ft drill pipe, but MAST extension is included to use 30ft pipe if needed.
Has new Swivel.
gear boxes have been rebuilt less than 1 year ago.
Rig has 3 lines.
Drill line
sand line
extra line.
If you need a rig that drills hard rock like butter this is it.

This unit can drill 2000 to 3000ft per day with 6 inch bit is HARD FORMATIONS, soft formations is faster, very much a production rig.
I have drill bits up to 14 inches for it. Rig is currently being used, and your welcome to inspect or try it out.
COMES with trailer load $$$ of extra parts, swivels, bits, hydraulic parts, mast ex section, 2 rolls of new cable, extra Kelly, reamers, drill collars, pump hoses, aluminum diverter box, and original owners and parts manual ( very detailed).
This unit will pay for itself in weeks, not years,

Price is $ 125,000.00 Us dollars. Can SHip world wide.

lower 48 states shpping lowboy is 2.50 per one way mile. Rig located in northern Colorado.

 

water well drill

 

Copyright 2015 Drillcat Rigs -parts- equipment. All rights reserved.

Web Hosting by Yahoo